Consolidated Statutes and Regulations Consolidated Statutes Consolidated Regulations Annual Statutes and Regulations Annual Statutes Annual Regulations Additional information Québec Official Publisher What’s new? Information note Policy of the Minister of Justice Laws: Amendments Laws: Provisions not in force Laws: Provisions brought into force Annual Statutes: PDF versions since 1996 Regulations: Amendments Annual Regulations: PDF versions since 1996 Court Decisions

S-3.3, r. 2 - Regulation respecting rail safety

Section 62
Disposition versions

Full text
62. Alignment, in relation to uniformity, measured from an 18.9 m (62 ft.) chord may not exceed 12.7 cm (5 in.).
When the track is tangent, the ends of the chord must be placed at points on the gauge side of the rail, 1.59 cm (5/8 in.) below the top of the rail head. Either rail may be used, however, the same rail must be used for the full length of that segment.
When the track is curved, the ends of the chord must be placed at points on the gauge side of the outer rail, 1.59 cm (5/8 in.) below the top of the rail head.
O.C. 1401-2000, s. 62.
© Gouvernement du Québec